Anet ET4 vs Anet ET4X: 19 Highlights & 37 Differences — So, Which 3D Printer Actually Works Better
Let's explore key specs and usability notes on two popular Anet models for casual and hobby users. Choosing the better 3d printer? This comparison shows Anet ET4 vs Anet ET4X side by side — from height, weight, package weight & build width to what users love.
Highlights 166
No extras. Just what matters.
Recaptor
Anet ET4 vs Anet ET4X: A Head-to-Head Comparison of Two Popular 3D Printers
When diving into consumer-level 3D printing, the Anet ET4 and Anet ET4X stand out as noteworthy choices. Both adopt the Cartesian frame type and utilize FDM/FFF printing technology, boasting identical print speeds and layer resolutions. They support standard filament material compatibility and open enclosure designs; features that are typically favored in hobbyist and entry-level 3D printing sets.
Yet, beneath these surface-level similarities, intriguing differences emerge. The ET4 debuted in 2020, while the ET4X is a fresher addition from 2023, combining improved energy efficiency and extended file format support. The printers share the same build area footprint, but the data reflect an unusually large build volume for the ET4, possibly indicating a measurement anomaly. Moreover, aspects such as weight, power consumption, safety sensors, and upgrade options vary, shaping distinct user experiences depending on your priorities.
Spotlight on Anet ET4 - Lightweight Versatility Meets Enhanced Safety
The Anet ET4 shines with its lightweight design, tipping the scales at approximately 7.5 lbs, making it notably more portable than its counterpart. Its slightly taller stature, with a height of 20 inches, adds to the presence without compromising desk space. What truly distinguishes the ET4 is its inclusion of two safety sensors compared to the ET4X's single sensor. This additional layer enhances operational safety, an important factor for hobbyists working in shared or home environments.
Another compelling feature is its screen, a 2.8-inch TFT panel with a specified 320×240 pixels resolution, potentially providing clearer visibility of controls and print progress. The ET4 also supports upgrades such as a camera module, useful for monitoring prints remotely, alongside enclosure options to help control environmental factors.
In terms of power, it requires a wider voltage range of 100-240 V, which may lend itself to more versatile international compatibility. However, this advantage comes with a trade-off: the ET4 pulls significantly more power at 360 watts, potentially increasing operational costs and heat output.
The Case for the Anet ET4X - Modern Efficiency at a Friendly Price
On the flip side, the Anet ET4X represents a modern evolution in this printer family. With a release year of 2023, it embodies advancements tailored for energy-conscious users. The most striking improvement lies in its impressive power consumption of just 110 watts, significantly lower than the ET4's demand. This reduction in electrical use could benefit users who intend to run the printer frequently or in settings mindful of electricity bills.
While it weighs more than double the ET4's at approximately 15.87 lbs, it's also a bit more compact vertically with an 18-inch height. This may help fit into tighter spaces. The ET4X matches the ET4 in print speed, layer precision, and build footprint, so there's no compromise in fundamental print capabilities.
Another subtle yet useful upgrade is its broader file format compatibility, including JPG support alongside STL and OBJ. This addition hints at enhanced model preview or alternative workflow options, appealing to users who curate or convert various digital content for printing. Although its screen resolution is unspecified, it retains the same 2.8-inch display size for consistency.
In terms of upgrade paths, the ET4X offers an enclosure upgrade only, making it a simpler setup lacking the camera option from the ET4. It has a single safety sensor, but maintains all essential certifications, underscoring safe and compliant operation.
Quick Take
For users prioritizing portability, enhanced safety, and flexible voltage use, the Anet ET4 remains a solid choice with clear strengths in upgradeability and screen clarity. However, the Anet ET4X presents an appealing package for budget-minded buyers who value modern energy efficiency and expanded file format support without sacrificing print quality or performance.
Bottom Line: Which One Should You Pick?
If cost-effectiveness and power savings top your checklist, then the 2023 Anet ET4X is your go-to. It packs all the essential features with lower energy expenditure and additional file compatibility while maintaining competitive print specs. But if your priorities lean toward a quieter, lighter printer with better screen quality and more upgrade possibilities, including advanced safety sensors and a camera attachment, the Anet ET4 remains a worthy contender despite its higher running cost.
Overall, the price difference, $285.99 for the ET4X at $285.99 at Geekbuying versus $349.85 for the ET4 at $349.85 at AliExpress, also tilts consideration in favor of the ET4X from a pure value standpoint.
Verdict
- Winner: Anet ET4X - Thanks to its modern design, superior energy efficiency, broader file support, and competitive pricing, it offers better value for everyday users.
- Runner-up: Anet ET4 - For those who prioritize portability, enhanced safety features, and upgrade flexibility, the ET4 remains a capable option despite its higher power consumption and price.
Comparisons 2
Two enter. One leaves your cart.Price comparisons
Anet ET4
Anet ET4X
Related comparisons 2
Because one duel is never enough.
0
Cartling
0
Cartling
Comparisons & Facts 166
Side by side. The numbers. The features. No drama.Not sure which smart tech to go for? We compared Anet ET4 vs Anet ET4X down to every detail — including specs, perks, and what users are really saying.
General Information 12
Release Year
What is the release year?
0 Anet ET4 0 Votes 2020
0 Anet ET4X 0 Votes 2023
vs
Release Year
The Release Year of Anet ET4 is 2020, while Anet ET4X was released in 2023, making the ET4X the newer model.
The year the 3D printer was first released.
Warranty Period
What is the warranty period?
0 Anet ET4 0 Votes 1 Year
0 Anet ET4X 0 Votes 1 Year
vs
Warranty Period
The Warranty Period for both Anet ET4 and Anet ET4X is 1 Year, making them equal in terms of warranty coverage.
Coverage period offered by the manufacturer.
Target User Level
What is the target user level?
0 Anet ET4 0 Votes Beginner
0 Anet ET4X 0 Votes Beginner, Intermediate
Indicates the recommended skill level.
Upgrade Path
Does it support an upgrade path?
Yes 0 Votes Anet ET4
Yes 0 Votes Anet ET4X
Anet ET4
An upgrade path exists for this model, allowing users to improve features or add accessories over time.
Anet ET4X
An available upgrade path means enhancements and additional features can be added, extending the printer's functionality over time.
Whether the printer can be expanded with official or third-party upgrades.
Model Number
What is the model number?
0 Anet ET4 0 Votes ET4
0 Anet ET4X 0 Votes ET4X
Anet ET4
Model number ET4 identifies this specific version within Anet's product lineup.
Manufacturer’s reference code for precise identification.
Printer Type
What type of printer is it?
0 Anet ET4 0 Votes FDM/FFF
0 Anet ET4X 0 Votes FDM/FFF
vs
Printer Type
Both Anet ET4 and Anet ET4X are FDM/FFF printer types, indicating they share the same printing technology.
Defines the printing technology used by the machine.
Assembly Type
What is the assembly type?
0 Anet ET4 0 Votes Prebuilt
0 Anet ET4X 0 Votes Prebuilt
Anet ET4X
The printer comes prebuilt, allowing quicker setup and usability right out of the box, suitable for users who prefer minimal assembly.
Shows whether the printer is sold as a kit requiring assembly or fully prebuilt.
Assembly Required
Is assembly required?
Yes 0 Votes Anet ET4
No
0
Votes
Anet ET4X
Anet ET4
Assembly is required, indicating the printer may come partly disassembled and needs user setup.
States if the printer requires assembly.
Country of Origin
What is the country of origin?
0 Anet ET4 0 Votes China
0 Anet ET4X 0 Votes China
vs
Country of Origin
Both Anet ET4 and Anet ET4X are manufactured in China, so their country of origin is the same.
The country where the product is designed or manufactured.
Product Name
What is the product name?
0 Anet ET4 0 Votes Anet ET4
0 Anet ET4X 0 Votes Anet ET4X
The commercial name of the 3D printer.
Intended Use
What is the intended use?
0 Anet ET4 0 Votes Consumer
0 Anet ET4X 0 Votes Consumer
vs
Intended Use
The Intended Use of both Anet ET4 and Anet ET4X is Consumer, meaning they are designed primarily for home or non-professional use.
Identifies the main user category.
Supported Applications
What applications are supported?
0 Anet ET4 0 Votes Prototyping, Miniatures
0 Anet ET4X 0 Votes Prototyping, Miniatures, Engineering, Jewelry
Lists the most common applications supported.
Dimensions & Weight 13
Weight
What is the printer’s weight?
vs
Weight
Anet ET4 weighs 7.5 lbs, significantly lighter than Anet ET4X which weighs 15.87 lbs, so ET4X is much heavier.
Net weight of the printer.
ET4 is lighter at 7.5 lbs compared to 15.87 lbs for the ET4X but the heavier ET4X could mean more stability which I appreciate.
Package Weight
What is the package weight?
vs
Package Weight
The Package Weight of Anet ET4 is 20.94 lbs compared to the Anet ET4X's 21.16 lbs, with the ET4X being slightly heavier.
total shipping weight including packaging.
Height
What is the printer’s height?
vs
Height
Anet ET4 stands 20 inches tall whereas Anet ET4X is shorter at 18 inches tall, making the ET4 taller.
The total external height of the printer.
The height difference is noticeable with the ET4 at 20 inches and the ET4X at 18 inches but I kinda prefer the smaller size of the ET4X.
Width
What is the printer’s width?
Anet ET4
The width of the printer is 16 inches, roughly 40.64 cm, denoting its horizontal footprint.
Anet ET4X
The printer's width is 18 inches (45.7 cm), which informs the amount of bench or workspace required.
The total external width of the printer.
Package Depth
What is the package depth?
Anet ET4
The package depth is 17 inches, which is about 43.18 cm. This dimension is useful for shipping or storage purposes.
Anet ET4X
Package depth is 20 inches (50.8 cm), useful for planning transport and setup space.
Depth of the printer’s packaging.
Space Requirement
What is the space requirement?
vs
Space Requirement
Anet ET4 requires 2 square feet of space, while Anet ET4X requires slightly more space at 2.1 square feet.
The minimum flat surface area needed to safely place the printer.
Depth
What is the printer’s depth?
Anet ET4
The printer's depth dimension is 15 inches, equivalent to 38.1 cm, important for workspace planning.
The total external depth of the printer.
Package Width
What is the package width?
Anet ET4X
The package width is 21 inches (53.3 cm), indicating the printer's footprint for transport and storage considerations.
Width of the printer’s packaging.
Folded Width
What is the folded width?
Who knows? 0 Votes Anet ET4
Who knows? 0 Votes Anet ET4X
Width of the printer when folded (if applicable).
Folded Depth
What is the folded depth?
Who knows? 0 Votes Anet ET4
Who knows? 0 Votes Anet ET4X
Depth of the printer when folded.
Folded Height
What is the folded height?
Who knows? 0 Votes Anet ET4
Who knows? 0 Votes Anet ET4X
Height of the printer when folded.
Package Height
What is the package height?
Height of the printer’s packaging.
Environmental & Power 9
Power Consumption
What is the power consumption?
vs
Power Consumption
The Power Consumption is 360 Watts for Anet ET4, in contrast to 110 Watts for Anet ET4X, showing ET4X is more energy-efficient.
Average power usage during active printing.
Power consumption is much lower on the ET4X with 110 watts compared to the ET4's 360 watts so the ET4X looks more energy efficient to me.
Storage Temperature Range
What is the storage temperature range?
0 Anet ET4 0 Votes 5-104°F
0 Anet ET4X 0 Votes 32-122°F
Anet ET4
The storage temperature range is from 5-104°F which converts to -15-40°C. This specifies the ambient conditions for safe storage to avoid damage to the printer or its components.
Safe temperature range for storing the printer when not in use.
Operating Humidity Range
What is the operating humidity range?
0 Anet ET4 0 Votes 10-80%
0 Anet ET4X 0 Votes 20-80%
vs
Operating Humidity Range
Operating Humidity Range is 10-80% for Anet ET4 and 20-80% for Anet ET4X, with ET4X having a higher minimum operating humidity.
Acceptable humidity range during printer operation.
Operating Temperature Range
What is the operating temperature range?
0 Anet ET4 0 Votes 50-95°F
0 Anet ET4X 0 Votes 50-104°F
Recommended ambient temperature range for safe operation.
Storage Humidity Range
What is the storage humidity range?
0 Anet ET4 0 Votes 5-90%
0 Anet ET4X 0 Votes 10-90%
vs
Storage Humidity Range
The Storage Humidity Range for Anet ET4 is 5-90%, compared to 10-90% for Anet ET4X, meaning ET4X requires a slightly higher minimum humidity.
Safe humidity range for storing the printer.
Power Supply Type
What type of power supply does it use?
0 Anet ET4 0 Votes Internal
0 Anet ET4X 0 Votes Internal
vs
Power Supply Type
Both Anet ET4 and Anet ET4X use an Internal Power Supply Type, indicating similarity in power design.
Indicates whether the printer uses an internal or external power supply.
Power Supply Voltage
What is the required power supply voltage?
0 Anet ET4 0 Votes 100-240 Volt
0 Anet ET4X 0 Votes 110-220 Volt
vs
Power Supply Voltage
Anet ET4 supports a Power Supply Voltage range of 100-240 Volt, while Anet ET4X supports 110-220 Volt, so ET4 has a slightly wider range.
Voltage input supported by the printer’s power supply.
Idle Power Consumption
What is the idle power consumption?
Who knows? 0 Votes Anet ET4X
Power drawn while the printer is on but not printing.
Energy Saving Mode
Does it have energy saving mode?
No
0
Votes
Anet ET4
No
0
Votes
Anet ET4X
Whether the printer includes an energy-saving or eco mode.
Build Specifications 21
Build Width
What is the build width?
vs
Build Width
The Build Width is identical for Anet ET4 and Anet ET4X at 8.66 inches.
Maximum printable width of the build area.
Build Depth
What is the build depth?
vs
Build Depth
Both Anet ET4 and Anet ET4X have the same Build Depth of 8.66 inches.
Maximum printable depth of the build area.
Build Volume
What is the build volume?
vs
Build Volume
Anet ET4 has a Build Volume of 134,750 cubic inches, vastly larger than Anet ET4X's 738 cubic inches, indicating much larger print capacity on the ET4.
total printable volume capacity.
Build volume differs massively with the ET4 offering about 134750 cubic inches while the ET4X only has 738 which is a huge factor for me.
Layer Resolution Minimum
What is the minimum layer resolution?
vs
Layer Resolution Minimum
The minimum Layer Resolution is 100 microns for both Anet ET4 and Anet ET4X, providing equal printing detail.
Finest layer height achievable.
Layer resolution minimum is identical at 100 microns for both models so there's no edge here; I like the ET4 slightly better overall honestly.
Build Height
What is the build height?
Anet ET4
The maximum build height is 9.84 inches, equal to 25 cm, limiting the tallest printable object.
Anet ET4X
The build height is 9.84 inches (25.0 cm), enabling fairly tall prints within the printer's capacity.
Maximum printable height of the build area.
Layer Resolution Maximum
What is the maximum layer resolution?
vs
Layer Resolution Maximum
Maximum Layer Resolution is 300 microns for both Anet ET4 and Anet ET4X, therefore they share the same upper resolution limit.
Thickest layer height achievable.
Optional Nozzle Sizes
What optional nozzle sizes are supported?
0 Anet ET4 0 Votes 0.2mm, 0.3mm, 0.4mm, 0.6mm
0 Anet ET4X 0 Votes 0.2mm, 0.4mm, 0.6mm, 0.8mm
Anet ET4
Supported nozzle diameters allow for customization of print details and speed, including 0.2mm, 0.3mm, 0.4mm, and 0.6mm sizes.
Anet ET4X
Optional nozzle sizes available include 0.2 mm, 0.4 mm, 0.6 mm, and 0.8 mm, allowing customization of print detail versus speed.
Alternative nozzle sizes supported.
Max Extruder Temperature
What is the max extruder temperature?
Anet ET4
The maximum extruder temperature is 482°F, which converts to 250°C, supporting a range of filament materials.
Anet ET4X
The max extruder temperature is 572 °F (300 °C), enabling printing with a wide range of filaments, including high-temperature materials like ABS and PETG.
Maximum heating capability of extruder.
Min Extruder Temperature
What is the min extruder temperature?
Anet ET4
The minimum extruder temperature of 392°F translates to 200°C, useful for printing materials requiring higher heat like ABS.
Anet ET4X
The minimum extruder temperature is 68 °F (20 °C), indicating the printer can extrude filament at near room temperatures, helpful for sensitive or specialty filaments requiring low heat.
Lowest operable extruder temperature.
Max Bed Temperature
What is the max bed temperature?
Anet ET4
The maximum bed temperature is 212°F, converting to 100°C, suitable for printing materials like ABS.
Anet ET4X
The maximum bed temperature is 212 °F (100 °C). Maintaining this temperature ensures better adhesion for materials like ABS that require a heated bed.
Maximum heated bed temperature.
Number of Extruders
How many extruders does the printer have?
0 Anet ET4 0 Votes 1
0 Anet ET4X 0 Votes 1
Anet ET4
This model is equipped with a single extruder, which is typical for entry-level to mid-range 3D printers.
Anet ET4X
The printer has one extruder, meaning it can print with one filament at a time, which suits standard single-material prints.
total extruders installed.
Standard Nozzle Diameter
What is the standard nozzle diameter?
Anet ET4X
The standard nozzle diameter is set at 0.4 mm, which is a common size balancing print speed and detail. This diameter supports a wide range of filament types and print resolutions.
Default nozzle diameter provided.
Materials & Compatibility 13
Filament Auto-Loading
Does it have filament auto-loading?
No
0
Votes
Anet ET4
No
0
Votes
Anet ET4X
vs
Filament Auto-Loading
Filament Auto-Loading is not supported on either the Anet ET4 or Anet ET4X, so both require manual filament loading.
Automatic feeding of filament into extruder.
Filament Drying Required
Is filament drying required?
No
0
Votes
Anet ET4
Yes 0 Votes Anet ET4X
Anet ET4X
This feature indicates that filament drying is necessary to prevent moisture-related print defects, important for material quality maintenance.
Whether drying filament before use is necessary.
Supported Filament Types
What filament types are supported?
0 Anet ET4 0 Votes PLA, ABS, PETG, TPU
0 Anet ET4X 0 Votes PLA, ABS, TPU, PETG, HIPS, Wood
Filament materials that the printer can process.
Max Supported Filament Diameter
What is the maximum supported filament diameter?
Maximum filament diameter that can be used.
Filament Dry Box
Does it support filament dry boxes?
No
0
Votes
Anet ET4
No
0
Votes
Anet ET4X
Supports use of a dry box to prevent filament moisture issues.
Multi-Material Printing
Can it print with multiple materials?
No
0
Votes
Anet ET4
No
0
Votes
Anet ET4X
Ability to print with multiple materials simultaneously.
Max Number of Materials Supported
What is the maximum number of materials supported?
0 Anet ET4 0 Votes 1
0 Anet ET4X 0 Votes 1
Maximum distinct materials supported in one job.
Third-Party Material
Does it support third-party materials?
Yes 0 Votes Anet ET4
Yes 0 Votes Anet ET4X
Ability to use non-proprietary materials.
Supported Resin Types
What resin types are supported?
0 Anet ET4 0 Votes None
0 Anet ET4X 0 Votes None
Resin types that the printer can use.
Compatible Resin Wavelength
What resin wavelength is compatible?
Who knows? 0 Votes Anet ET4
Who knows? 0 Votes Anet ET4X
Light wavelength compatibility for curing resins.
Max Resin Tank Capacity
What is the maximum resin tank capacity?
Who knows? 0 Votes Anet ET4
Who knows? 0 Votes Anet ET4X
Maximum amount of resin the tank can hold.
Resin Auto-Fill
Does it have resin auto-fill?
No
0
Votes
Anet ET4
No
0
Votes
Anet ET4X
vs
Resin Auto-Fill
Neither Anet ET4 nor Anet ET4X support Resin Auto-Fill, so both lack this automatic resin handling feature.
Automatic filling of resin during prints.
Print Speed & Performance 15
Official Max Print Speed
What is the official max print speed?
vs
Official Max Print Speed
The Official Max Print Speed is 150 mm/s for both Anet ET4 and Anet ET4X, indicating equal maximum speed potential.
Manufacturer-claimed maximum print speed.
Time to Print Benchy
How long does it take to print a Benchy?
vs
Time to Print Benchy
Time to Print Benchy is 90 minutes for both Anet ET4 and Anet ET4X, so print times for this benchmark model are the same.
Average time to complete the benchmark “Benchy” model.
Print Accuracy
What is the print accuracy?
vs
Print Accuracy
Print Accuracy is equally 100 microns for Anet ET4 and Anet ET4X, suggesting similar print precision.
Degree of dimensional accuracy of printed parts.
Print accuracy is the same at 100 microns for both so that doesn't help choose but I still prefer the ET4 for its other specs.
Idle Noise Level
What is the idle noise level?
vs
Idle Noise Level
Idle Noise Level is 30 dB for Anet ET4 compared to 35 dB for Anet ET4X, making ET4 quieter when idle.
Measures the noise when printer is on but not printing; lower is better.
Idle noise level is quieter on the ET4 with 30 dB over 35 dB on ET4X so I would pick the ET4 if I want a quieter environment.
Measured Effective Print Speed
What is the effective measured print speed?
vs
Measured Effective Print Speed
Both Anet ET4 and Anet ET4X share the same Measured Effective Print Speed of 60 mm/s, meaning they print at the same real-world speed.
Independently measured real-world print speed.
Print Recovery
Does the printer support print recovery?
Yes 0 Votes Anet ET4
Yes 0 Votes Anet ET4X
Anet ET4
Print recovery is supported, which means if a print is interrupted by power loss or other issues, printing can resume from the last saved point.
Anet ET4X
Print recovery feature enables continuation of printing after power loss or interruption, minimizing failed print jobs and material waste.
Ability to resume print after power loss or interruption.
Operating Noise Level
What is the operating noise level?
Anet ET4
The operating noise level is approximately 50 dB, which is fairly quiet and suitable for home or office environments.
Anet ET4X
Operating noise level is 50 dB, relatively quiet for a 3D printer, suitable for home or office environments where noise is a consideration.
Measures the sound generated during printing; lower is quieter.
First Layer Calibration
How is the first layer calibrated?
0 Anet ET4 0 Votes Auto
0 Anet ET4X 0 Votes Manual
Anet ET4X
First layer calibration is manual, requiring user involvement to level the bed and ensure proper initial layer adhesion, impacting print quality.
Method used for first-layer bed calibration.
Bridging Performance
What is the bridging performance?
Anet ET4X
The bridging performance is 20 mm, indicating the maximum distance the printer can span unsupported, important for overhang geometries.
Longest unsupported horizontal span printed without sagging.
Continuous Print Time
What is the max continuous print time?
Anet ET4X
The printer supports continuous print times up to 72 hours, suitable for long, unattended printing sessions of large or multiple objects.
Maximum supported printing time without interruption.
Print Adhesion Type
What type of print adhesion is used?
0 Anet ET4 0 Votes Other
0 Anet ET4X 0 Votes Other
Method used to secure prints to the bed.
Overhang Performance
What is the overhang performance?
Maximum angle of unsupported overhangs achievable.
Hardware Features 20
Frame Type
What is the frame type?
0 Anet ET4 0 Votes Cartesian
0 Anet ET4X 0 Votes Cartesian
vs
Frame Type
The Frame Type for both Anet ET4 and Anet ET4X is Cartesian, so their structural design is the same.
Mechanical structure style of the printer.
Screen Size
What is the display screen size?
vs
Screen Size
Screen Size is 2.8 inches on both Anet ET4 and Anet ET4X, so their display sizes are identical.
Size of the display screen.
Enclosure
Is the printer open or enclosed?
0 Anet ET4 0 Votes Open
0 Anet ET4X 0 Votes Open
vs
Enclosure
Both Anet ET4 and Anet ET4X have an Open Enclosure, indicating open-frame design in both models.
Whether the printer has an open or enclosed build chamber.
Screen Resolution
What is the display resolution?
0 Anet ET4 0 Votes 320×240p
Who knows? 0 Votes Anet ET4X
vs
Screen Resolution
Screen Resolution is 320×240p on Anet ET4 but is not available for Anet ET4X, showing ET4 has a specified resolution while ET4X does not.
Resolution of the display screen.
Build Plate Surface Texture
What is the build plate texture?
0 Anet ET4 0 Votes Smooth
0 Anet ET4X 0 Votes Smooth
Anet ET4
The build plate has a smooth surface texture, which can aid in adhesion and ease of part removal.
Anet ET4X
The build plate has a smooth surface texture, which affects adhesion and the finish quality of the printed object's bottom layer.
Surface finish of the build plate.
Build Plate Removable
Is the build plate removable?
Yes 0 Votes Anet ET4
Yes 0 Votes Anet ET4X
Anet ET4
The build plate is removable, which facilitates easier part removal and maintenance.
Anet ET4X
The build plate is removable, which simplifies print removal and plate maintenance.
Whether the build plate can be detached for print removal.
Touchscreen Display
Does it have a touchscreen display?
Yes 0 Votes Anet ET4
Yes 0 Votes Anet ET4X
Anet ET4X
The touchscreen display enhances user interaction by providing intuitive controls directly on the printer. It simplifies navigating settings and monitoring print progress without external devices.
Indicates if a touchscreen is provided for controls.
Manual Bed Leveling
Does it support manual bed leveling?
No
0
Votes
Anet ET4
Yes 0 Votes Anet ET4X
Anet ET4X
Manual bed leveling requires user adjustment to ensure the print bed is flat and properly aligned with the nozzle, critical for initial print success.
Support for traditional manual bed leveling.
Filament Runout Sensor
Does it have a filament runout sensor?
No
0
Votes
Anet ET4
Yes 0 Votes Anet ET4X
Anet ET4X
The filament runout sensor detects when filament is about to run out, preventing failed prints by pausing for refills.
Detects when filament runs out and pauses printing.
Cooling Fans
Does it have cooling fans?
Yes 0 Votes Anet ET4
Yes 0 Votes Anet ET4X
Anet ET4X
Cooling fans are included to cool the printed layers and components, helping to improve print quality and material performance.
Fans for cooling extruder and printed layers.
Air Filtration
What type of air filtration is included?
0 Anet ET4 0 Votes None
0 Anet ET4X 0 Votes None
vs
Air Filtration
Both Anet ET4 and Anet ET4X have no Air Filtration, meaning neither offers air quality enhancement during printing.
Air filtering system for reducing fumes and particulates.
Built-in Camera
Does it have a built-in camera?
No
0
Votes
Anet ET4
No
0
Votes
Anet ET4X
Camera for monitoring prints and creating time-lapses.
Connectivity & Software 13
Firmware Update
Does the printer support firmware updates?
Yes 1 Votes Anet ET4
Yes 0 Votes Anet ET4X
vs
Firmware Update
Firmware Update capability is present on both Anet ET4 and Anet ET4X, ensuring both can receive software improvements.
Indicates whether the printer supports firmware updates; important for new features and bug fixes.
Both printers allow firmware updates but neither supports remote updates so this doesn't influence my preference, I lean slightly towards the ET4.
Supported File Formats
What file formats are supported?
0 Anet ET4 0 Votes STL, OBJ
0 Anet ET4X 0 Votes JPG, OBJ, STL
vs
Supported File Formats
Supported File Formats differ slightly: Anet ET4 supports STL and OBJ, while Anet ET4X supports JPG, OBJ, and STL, with ET4X supporting one additional file format.
File types accepted for printing.
Mobile App
Does it support a mobile app?
No
0
Votes
Anet ET4
No
0
Votes
Anet ET4X
vs
Mobile App
Mobile App support is absent on both Anet ET4 and Anet ET4X, so neither offers app-based control.
Ability to use a mobile app for control/monitoring.
Multi-Printer Fleet Control
Does it support multi-printer fleet control?
No
0
Votes
Anet ET4
No
0
Votes
Anet ET4X
vs
Multi-Printer Fleet Control
Multi-Printer Fleet Control is not supported by either Anet ET4 or Anet ET4X, limiting centralized multiple printer management.
Enables managing multiple printers simultaneously.
Remote Firmware Update
Does it support remote firmware updates?
No
0
Votes
Anet ET4
No
0
Votes
Anet ET4X
vs
Remote Firmware Update
Neither Anet ET4 nor Anet ET4X supports Remote Firmware Update, requiring manual firmware installation on both.
Supports updating firmware remotely.
Connectivity Options
What connectivity options are available?
0 Anet ET4 0 Votes USB, SD Card
0 Anet ET4X 0 Votes USB, TF Card
Anet ET4X
Connectivity options include USB and TF card, allowing direct file transfer from external storage without the need for constant PC connection.
Available connection types for file transfer and control.
Remote Monitoring
Does it support remote monitoring?
No
0
Votes
Anet ET4
No
0
Votes
Anet ET4X
Ability to monitor prints remotely via app or web.
Cloud-Based Software
Does it support cloud-based software?
No
0
Votes
Anet ET4
No
0
Votes
Anet ET4X
Indicates whether the printer uses or supports cloud software.
Proprietary Software Required
Is proprietary software required?
No
0
Votes
Anet ET4
No
0
Votes
Anet ET4X
Whether use of manufacturer’s software is mandatory.
Supported Slicers
Which slicers are supported?
0 Anet ET4 0 Votes Cura
0 Anet ET4X 0 Votes Cura, Repetier-host, Simplify3D, Slic3r
Slicer programs that are compatible with the printer.
File Transfer Method
What file transfer methods are supported?
0 Anet ET4 0 Votes USB, SD Card
0 Anet ET4X 0 Votes USB, SD Card
Methods available to transfer files to the printer.
API/SDK Integration
Does it support API/SDK integration?
No
0
Votes
Anet ET4
No
0
Votes
Anet ET4X
Allows developers to integrate with APIs or SDKs.
Resin Workflow 10
UV Light Source Type
What UV light source type does it use?
0 Anet ET4 0 Votes None
0 Anet ET4X 0 Votes None
vs
UV Light Source Type
The UV Light Source Type is None for both Anet ET4 and Anet ET4X, indicating they do not use UV light for curing.
Type of UV light source used to cure resin layers.
UV Power Output
What is the UV power output?
Who knows? 0 Votes Anet ET4
Who knows? 0 Votes Anet ET4X
Strength of UV light exposure affecting curing speed and accuracy.
Resin Layer Curing Speed
What is the resin layer curing speed?
Who knows? 0 Votes Anet ET4
Who knows? 0 Votes Anet ET4X
Time required to cure one resin layer.
Resin Tank Lifetime
What is the resin tank lifetime?
Who knows? 0 Votes Anet ET4
Who knows? 0 Votes Anet ET4X
Approximate number of prints before resin tank replacement.
Resin Cartridge System
Does it use a resin cartridge system?
No
0
Votes
Anet ET4
No
0
Votes
Anet ET4X
Whether it uses a sealed resin cartridge system for easy handling.
Auto Resin Mixing
Does it have auto resin mixing?
No
0
Votes
Anet ET4
No
0
Votes
Anet ET4X
Whether resin is automatically mixed during operation for consistency.
Resin Heating System
Does it have a resin heating system?
No
0
Votes
Anet ET4
No
0
Votes
Anet ET4X
Whether the printer can heat resin for optimal viscosity.
Wash Time
What is the wash time?
Who knows? 0 Votes Anet ET4
Who knows? 0 Votes Anet ET4X
Typical duration to wash prints in post-processing.
Cure Time
What is the cure time?
Who knows? 0 Votes Anet ET4
Who knows? 0 Votes Anet ET4X
Typical duration to fully cure resin prints after washing.
Post-Processing Equipment Compatibility
Is it compatible with post-processing equipment?
No
0
Votes
Anet ET4
No
0
Votes
Anet ET4X
vs
Post-Processing Equipment Compatibility
Neither Anet ET4 nor Anet ET4X is compatible with Post-Processing Equipment, so both require manual post-processing.
Whether the printer supports integration with wash/cure stations.
Safety & Compliance 10
Safety Sensors Count
How many safety sensors are included?
0 Anet ET4 1 Votes 2
0 Anet ET4X 0 Votes 1
vs
Safety Sensors Count
Anet ET4 has 2 Safety Sensors Count while Anet ET4X has only 1, potentially meaning the ET4 has better safety monitoring.
Number of safety sensors installed in the printer.
The ET4 has 2 safety sensors but the ET4X comes with just 1 which seems safer to me hence I'd go with ET4 on safety.
Child Lock Mode
Does it have a child lock mode?
No
0
Votes
Anet ET4
No
0
Votes
Anet ET4X
vs
Child Lock Mode
Both Anet ET4 and Anet ET4X lack a Child Lock Mode, affecting safety features for use around children.
A setting that prevents unauthorized or unsafe use by children.
Safety Certifications
What safety certifications does it have?
0 Anet ET4 0 Votes CE, RoHS, FCC
0 Anet ET4X 0 Votes CE, RoHS, FCC
vs
Safety Certifications
Safety Certifications (CE, RoHS, FCC) are identical for Anet ET4 and Anet ET4X, ensuring standard compliance for both.
Official safety standards the printer complies with.
Overheat Protection
Does it feature overheat protection?
Yes 0 Votes Anet ET4
Yes 0 Votes Anet ET4X
Anet ET4
Overheat protection is included, enhancing device safety by preventing damage due to excessive temperatures.
Shuts down printer when components exceed safe temps.
Enclosure Lock
Does it have an enclosure lock?
No
0
Votes
Anet ET4
No
0
Votes
Anet ET4X
Prevents accidental access to the chamber while printing.
Emergency Stop Button
Does it have an emergency stop button?
No
0
Votes
Anet ET4
No
0
Votes
Anet ET4X
Dedicated button to stop the printer instantly in emergencies.
Fireproof Build Plate
Does it have a fireproof build plate?
No
0
Votes
Anet ET4
No
0
Votes
Anet ET4X
vs
Fireproof Build Plate
Neither Anet ET4 nor Anet ET4X feature a Fireproof Build Plate, which may affect fire hazard considerations.
Build plate is resistant to fire for extra safety.
Auto Shutdown on Error
Does it auto shut down on errors?
Yes 0 Votes Anet ET4
No
0
Votes
Anet ET4X
Shuts printer down automatically when critical errors occur.
Resin Spill Protection
Does it have resin spill protection?
No
0
Votes
Anet ET4
No
0
Votes
Anet ET4X
Prevents or contains resin leaks in resin printers.
Air Quality Compliance
Is it compliant with air quality standards?
No
0
Votes
Anet ET4
No
0
Votes
Anet ET4X
vs
Air Quality Compliance
Neither Anet ET4 nor Anet ET4X complies with Air Quality standards, which may be relevant for sensitive environments.
Meets air quality standards for emissions and filtration.
Maintenance & Upgrades 10
Nozzle Replaceable
Is the nozzle replaceable?
Yes 0 Votes Anet ET4
Yes 0 Votes Anet ET4X
vs
Nozzle Replaceable
The Nozzle is Replaceable on both Anet ET4 and Anet ET4X, allowing for easy nozzle maintenance or upgrades.
Specifies if the nozzle can be replaced with different sizes or when worn.
Upgrade Options
What upgrade options are supported?
0 Anet ET4 1 Votes Enclosure, Camera
0 Anet ET4X 0 Votes Enclosure
vs
Upgrade Options
Upgrade Options differ: Anet ET4 offers Enclosure and Camera upgrades, while Anet ET4X offers only Enclosure upgrades, providing more upgrade flexibility with ET4.
Supported upgrade kits and modules for expanding functionality.
Upgrade options include enclosure and camera on the ET4 while ET4X only supports enclosure; this versatility makes me favor the ET4.
Spare Parts Availability
Are spare parts available?
Yes 0 Votes Anet ET4
Yes 0 Votes Anet ET4X
vs
Spare Parts Availability
Spare Parts Availability is confirmed for both Anet ET4 and Anet ET4X, supporting repairability.
Whether spare parts are readily available for purchase.
Predictive Maintenance Alerts
Does it feature predictive maintenance alerts?
No
0
Votes
Anet ET4
No
0
Votes
Anet ET4X
vs
Predictive Maintenance Alerts
Predictive Maintenance Alerts are not available on Anet ET4 and Anet ET4X, limiting proactive upkeep features.
Predicts potential failures and alerts the user before issues arise.
Service Interval
What is the service interval?
Anet ET4X
Regular service intervals are recommended every 200 hours to maintain optimal performance and reduce downtime.
Recommended time between major servicing.
Lubrication Required
Does it require lubrication?
Yes 0 Votes Anet ET4
Yes 0 Votes Anet ET4X
Anet ET4X
Lubrication is required for the printer's moving parts to maintain smooth operation and prolong mechanical life.
Indicates if lubrication is needed for smooth operation.
Supported Mod Kits
What mod kits are supported?
0 Anet ET4 0 Votes Enclosure
0 Anet ET4X 0 Votes Enclosure
Officially supported modification kits.
Self-Diagnostics
Does it have self-diagnostics?
No
0
Votes
Anet ET4
No
0
Votes
Anet ET4X
Printer can analyze itself for common faults and errors.
Maintenance Reminders
Does it provide maintenance reminders?
No
0
Votes
Anet ET4
No
0
Votes
Anet ET4X
vs
Maintenance Reminders
Maintenance Reminders are not present on either Anet ET4 or Anet ET4X, requiring users to track maintenance manually.
Automated alerts to schedule maintenance tasks.
Tool-Free Maintenance
Is tool-free maintenance supported?
No
0
Votes
Anet ET4
No
0
Votes
Anet ET4X
Allows key maintenance tasks without tools.
Business & Professional Features 10
Print Farm Management
Does it support print farm management?
No
0
Votes
Anet ET4
No
0
Votes
Anet ET4X
Anet ET4
Print farm management features are not supported, so this model is better suited for single-device use.
Indicates if multiple printers can be networked and managed as a farm.
Cloud Fleet Management
Does it support cloud fleet management?
No
0
Votes
Anet ET4
No
0
Votes
Anet ET4X
Ability to manage multiple devices remotely via cloud software.
Workflow Integration
Does it integrate with workflows?
No
0
Votes
Anet ET4
No
0
Votes
Anet ET4X
Integration with professional workflow tools and design platforms.
Multi-User Profiles
Does it support multi-user profiles?
No
0
Votes
Anet ET4
No
0
Votes
Anet ET4X
Allows multiple users to have distinct profiles and permissions.
Remote Access Control
Does it support remote access control?
No
0
Votes
Anet ET4
No
0
Votes
Anet ET4X
Ability to control printer access remotely with permissions.
Enterprise Security Features
Does it have enterprise security features?
No
0
Votes
Anet ET4
No
0
Votes
Anet ET4X
vs
Enterprise Security Features
Enterprise Security Features are not included with Anet ET4 and Anet ET4X, so neither is targeted at high-security environments.
Advanced security measures like encryption, secure login, and permissions.
Licensing Options
Are licensing options available?
No
0
Votes
Anet ET4
No
0
Votes
Anet ET4X
vs
Licensing Options
Licensing Options are not offered on either Anet ET4 or Anet ET4X, indicating no software licensing distinctions.
Availability of enterprise licensing for organizations.
Usage Analytics Dashboard
Does it include a usage analytics dashboard?
No
0
Votes
Anet ET4
No
0
Votes
Anet ET4X
vs
Usage Analytics Dashboard
Usage Analytics Dashboard is not available on Anet ET4 or Anet ET4X, limiting usage data insights.
Provides usage statistics and analytics for tracking productivity and costs.
SLA & Support Contracts
Are SLA or support contracts available?
No
0
Votes
Anet ET4
No
0
Votes
Anet ET4X
vs
SLA & Support Contracts
Neither Anet ET4 nor Anet ET4X offers SLA & Support Contracts, limiting formal service agreements.
Option for service-level agreements and premium support contracts.
Predictive Cost Estimation
Does it have predictive cost estimation?
No
0
Votes
Anet ET4
No
0
Votes
Anet ET4X
vs
Predictive Cost Estimation
Predictive Cost Estimation is absent in both Anet ET4 and Anet ET4X, affecting budget forecasting.
Estimates printing costs (material, power, time) before job start.
Enterprise Monitoring & Sensors 10
Bed Temperature Sensors
Does it have bed temperature sensors?
Yes 0 Votes Anet ET4
Yes 0 Votes Anet ET4X
vs
Bed Temperature Sensors
Both Anet ET4 and Anet ET4X include Bed Temperature Sensors, providing consistent bed temperature control during printing.
Detects and regulates the build plate temperature.
Chamber Temperature Sensors
Does it have chamber temperature sensors?
No
0
Votes
Anet ET4
No
0
Votes
Anet ET4X
vs
Chamber Temperature Sensors
Chamber Temperature Sensors are not present in Anet ET4 or Anet ET4X, limiting environmental monitoring inside the chamber.
Tracks and maintains chamber temperature for consistent prints.
Vibration Sensor
Does it include a vibration sensor?
No
0
Votes
Anet ET4
No
0
Votes
Anet ET4X
vs
Vibration Sensor
Neither Anet ET4 nor Anet ET4X includes a Vibration Sensor, so vibration monitoring is not possible on both.
Detects vibrations and compensates for print accuracy.
Print Log Storage
Does it have print log storage?
No
0
Votes
Anet ET4
No
0
Votes
Anet ET4X
vs
Print Log Storage
Print Log Storage is not supported by either Anet ET4 or Anet ET4X, meaning no print history can be saved locally.
Records print job history and diagnostic data.
Remote Error Alerts
Does it provide remote error alerts?
No
0
Votes
Anet ET4
No
0
Votes
Anet ET4X
Sends error notifications to remote devices.
Predictive Failure Logs
Does it support predictive failure logs?
No
0
Votes
Anet ET4
No
0
Votes
Anet ET4X
Tracks and predicts potential failures before they occur.
Calibration History Log
Does it have a calibration history log?
No
0
Votes
Anet ET4
No
0
Votes
Anet ET4X
Stores history of calibration for quality control.
Sensor Count
How many sensors are included?
0 Anet ET4 0 Votes 2
0 Anet ET4X 0 Votes 2
total number of sensors installed in the printer.
Filament Jam Detection
Does it support filament jam detection?
No
0
Votes
Anet ET4
No
0
Votes
Anet ET4X
vs
Filament Jam Detection
Filament Jam Detection is not available on Anet ET4 or Anet ET4X, so users must manually watch for jams.
Detects blockages or jams in the filament path.
Extruder Pressure Sensor
Does it have an extruder pressure sensor?
No
0
Votes
Anet ET4
No
0
Votes
Anet ET4X
Monitors extrusion pressure to prevent under- or over-extrusion.
Surveys
Because hot takes deserve votes.Printing Speed
How would you rate the printing speed of this 3D printer?
Print Quality and Detail
How would you describe the print quality and level of detail produced by this 3D printer?
Build Volume Capacity
How do you find the build volume capacity of this 3D printer?
Material Consumption Efficiency
How efficient is this 3D printer in using filament or resin materials?
Noise Level
How noisy is this 3D printer during operation?
Durability and Lifespan
How durable does this 3D printer seem in terms of lifespan?
Performance
How would you rate the overall performance of this 3D printer in terms of print quality and reliability?
Ease of Setup
How easy was the setup process for this 3D printer?
Pricing
How would you rate the pricing for this 3D printer?
Design Appeal
How would you rate the design appeal of this 3D printer?
Guides 2
Files 1
Anet ET4 3D Printer User Manual
Files 1
Anet ET4X 3D Printer User Manual
Reviews 0
The good, the bad, and the brutally honest.Average Rating
Discussions 0
Thoughts, takes, and hot debates.Awards 0
Only the best made it here.Collections 0
Treasures You’ve picked. No fluff, all fun.More 3D Printers 0
Unlock more awesome finds.Other Anet 3D Printers 6
Other Anet 3D Printers 1
